Power Presses

Even more accurate, even more dynamic - the Power Presses that raise standards of precision & rigidity

Single Point Suspension Non-Inclinable single action press having steel plate fabricated construction duly stress relieved with 6 points gibbing of the slide, fitted with pneumatically operated combined single disc. friction clutch & brake.

Additional Features

• Reduced noise & vibrations
• Minimal frame gapping, low angular deflection < 1.5 minutes
• High rigidity frame & bolster
• High precision forming for longer die life
• Hi-Torque pneumatically operated single disc combined clutch & brake unit
• Gear transmission runs in oil bath
• Wide slide & bolster area

Standard Accessories

• ISI marked electric motor with electrical control panel
• Motorized grease pump
• Hydraulic overload safety
• 8 way imported rotary cam limit switch
• Dual solenoid valve
• Die height indicator
• Motorized slide adjustment (SNX 63 & above)
• PLC control system
• Anti repeat safety device
• Pneumatic balancers
• Production counter
• 2 nos misfeed socket

Optional Accessories

• Variable speed with VFD motor
• Pneumatic die cushion
• Photo electric safety device
• Foot switch
• Quick die change system

SEW Straight Side, Cross Shaft, H Frame-SXP Series

Description

‘SEW’- SXP Series Cross Shaft ‘H’ Frame Double Column Geared Power Press

Salient Features

• Single point suspension
• Non-Inclinable single action press
• Steel Plate Fabricated Construction
• Duly Stress Relieved
• 4 Point gibbing of slide
• Fitted with pneumatically operated combined single disc, friction clutch & brake

Accessories

Standard Accessories

• Electricals, control panel & production counter
• Hydraulic overload safety
• Motorized slide adjustment with brake motor & die height indicator (0.1 mm)
• ‘SMC make FRL & pneumatic fittings / ‘Ross/Toyooki’ Japan make dual solenoid valve
• Adjustable pneumatic balancers, for off setting weight of die, slide & connection
• Motorized grease lubrication (Japan make)
• Slide knockout device/6- way cam limit switches (Imported)
• Anti repeat safety device
• PLC control system
• Misfeed detector socket

Optional Accessories

• Variable stroke
• Pneumatic die cushion
• Photo safety guards

Note: Technical details can be varied according to the model.

Applicable to large and heavy tonnage die to tool with multiple precision stages in blanking, piercing, bending forming for single for the progressive application. Wide bolster and slide area. These presses are most suitable for automobile components & white good industry.

Features:

• Rigid frame design ensures less vibration and low noise, increasing tool life improves product accuracy.
• Hydraulic overload protection.
• Full length, high precision 8-point gib with bronze liners for accurate slide guidance.
• Automatic recirculating lubrication with the progressive block.
• Pneumatic high torque wet clutch and brake unit with sintered multi-disc linings provides low noise, long life operation with minimal maintenance.
• Long stroke drawing and blanking operations.

Standard Accessories

• Automatic recirculating lubrication system
• Hydraulic overload protection system
• Dual height indicator
• Air counter balancer system
• Digital crank angle indicator
• 8 Point rotary cam switch
• Productcounter
• Batch counter
• Misfeed sockets
• Air outlet
• Control console
• Combination clutch & brake
• Large lockable emergency stop bottom
• Die light device
• Safety fence
• Ladder
• Operating stand

Optional Accessories

• Die cushion
• Photoelectric safety device
• Variable speed motor
• Flywheel brake and main motor FWD/REV controller
• Load tonnage monitor
• Quick die change system
• Anti vibration mounts
• Moving bolster
• Knockout device

“SEW”-SXP–2 Series Two Point, H Frame, Cross Shaft Power Press

Salient Features:

• Box type steel welded construction
• Highly rigid H frame, duly stress relieved
• Slide moves in 4 point long guides
• Motorized slide adjustment with die height indicator (0.1 mm)
• Dual solenoid valve for safety

Standard Accessories

• Hydraulic overload safety
• Motorized slide adjustment with die height indicator
• Automatic Grease Lubrication
• Air counter balancers
• Programmable limit switches
• Stroke counter
• Misfeed detector socket

Optional Accessories

• Pneumatic die cushion
• Safety guards
• Quick die change system
• Die area lighting
• Variable frequency drive
• Air tool socket

• High performance, high production, reliability, economy & safety insured
• Welded steel construction with maximum rigidity&lowest deflection.
• Fabricated steel slide running in extra-long guides to ensure perfect alignment.
• Combination clutch and brake with inter-looking of functions and dual solenoid valve to ensure "Fail-Safe" operations.
• Variable speed drive for a wide range and quick selections of speed.
• Motorized lubrication System, centrally controlled and monitored, so that in the case of any fault in the system the machine stops immediately.
• A well-designed control station for easy operations.
• Stroke counter, slide adjustment indicator provided on the machine.
• Hydraulic overload safety (Optional). Flywheel & motor guards.
• Bearing temperature sensor is an optional feature.
• This prevents damage to major berings by stopping the machine if bearing temperature exceeds present values.

Standard Accessories

• Bolster Plate, as per your drawing
• Production counter electronic readout
• Shut height indicator - digital readout
• Press controls two hand control Off_Inch_Single Stroke Continuous stroke TDC stop
• Operators Control Panel, Roving type
• Rotary cam limit
• Switch 8 Cam - imported
• Motorized slide adjustment
• Crank angle indicator digital type
• Machining pad for mounting feeder bracket
• Crack shaft extension for mounting feeder drive arrangement
• Three Miss Feed Sockets for interlocking miss - feed switches from Press tools
• PLC based electrical circuit
• Preset and batch counter
• Dual solenoid valve
• Oil grease drip pans
• Set of hand tools (Special to Press)
• 4 - Pieces Hydraulically Pre - stressed by Tie Rods
• Hydraulic Stick Release to Solve tool - jam Problems within Seconds
• Plunger Guide Design eliminates the change in guide clearance. Connecting Rod
• Plunger Clearance is also maintained

Optional Accessories

• Press Automation
• S-type Loop Control System with Double Coil Reel and Trip Straightener
• Mechanical gripper feed
• Gear charge
• Gear Feed
• Quick die change system
• Anti vibration mouts

• High approach/ return & low forming speed
• Highly rigid frame with minimum deflection
• Extra long 6 point gibs
• Speed slows down near bottom dead center

Accessories

Standard accessories:

• Hydraulic overload protector
• Motorized slide adjustment device
• Die height indicator (0.1 mm)
• Slide counter balancers
• Programmable Cam switches
• Antirepeat Safety device
• Misfeed detector socket
• Pneumatic ejector
• Knock out device

Optional Accessories

• PneumaticdDie cushion
• Photoelectric safety device
• Variable speed device (Inverter)
• Quick Die change device (Q.D.C.S)
• Rubber mount

• Electric motor
• Starter
• Knock out bar
• Bolster plate
• Guard
• Set of 'V' Belts

• One shot lubrication pump
• Inclinable mechanism

SBEW Heavy Duty H Frame Power Presses

The steel frame is fabricated out of solid steel plates, properly ribbed to withstand maximum stress. All steel frames are stress relieved after fabrication of the frame.

Features:

• Crankshaft is made from Forged Class IV Steel and runs in Phosphorous Bronze Bushes
• Slides are of rugged construction and rigidly braced to resist reflection.

• Motor
• Starter V-Belts
• Bolster plate
• Guards
• Shot lubricator

Even more accurate, Even more dynamic - The Power Presses that raise standard's of precision & rigidity

Additional Features:

• Single point suspension
• Non-Inclinable single action
• Press having steel plate fabricated construction
• Duly stress relieved with 6 Point Gibbing of slide
• Reduced noise & vibrations
• Minimal frame gapping, low angular deflection < 1.5 minutes
• High rigidity frame & bolster
• High precision forming for longer die life
• Hi-Torque pneumatically operated single disc combined clutch & brake unit
• Gear transmission runs in oil bath
• Wide slide & bolster area

Note: Technical details can vary according to the model.

Even more accurate, Even more dynamic - The Power Presses that raise standard's of precision & rigidity

Features:

• Single Point Suspension
• Non-Inclinable Single Action
• Press having Steel Plate Fabricated Construction
• Duly Stress Relieved with 6 Point Gibbing of Slide
• Fitted with Pneumatically Operated Combined Single Disc
• Friction Clutch & Brake

Additional Features:

• Reduced Noise & Vibrations
• Minimal Frame Gapping, Low Angular Deflection < 1.5 minutes
• High Rigidity Frame & Bolster
• High Precision Forming for Longer Die Life
• Hi-Torque Pneumatically Operated Single Disc Combined Clutch & Brake Unit
• Gear Transmission Runs in Oil Bath
• Wide Slide & Bolster Area

Note: Technical details can vary according to the model.

Straight side frame designed virtually eliminates angular deflection, providing increased precision for progressive die applications and reducing maintenance costs on tooling.

'SNXR' Series is applicable to light, thin material, for single, and progressive die application in blanking, piercing, bending, forming and can be interlink with ROT line or transfer unit.

Standard Accessories

• Electrical, control panel & production counter, hydraulic overload safety
• ‘SMC’/’FESTO’ make FRL & pneumatic fittings
• Motorized grease lubrication (Japan make)
• Slide knockout device, 6-way cam limit switches (Imported)
• Anti repeat safety device, PLC control system
• Misfeed detector socket, ‘ROSS’ / Toyooki Japan make dual solenoid valve

Optional Accessories

• Variable stroke
• Pneumatic die cushion
• Photo safety guard
• Variable speed
• Anti vibration mounts

• Applicable for single and progressive die application in blanking, piercing, bending, forming,
• Interlink with transfer unit.
• Rigid frame with less deflection.
• Wide bolster and side area.
• These presses are most suitable for automobile components & white good industry.

Accessories

Standard Accessories

• ISI marked electric motor with electrical control panel
• Motorized grease pump
• Hydraulic overload safety
• 8 Way imported rotary cam limit switch
• Dual solenoid valve
• Die height indicator
• Motorized slide adjustment (SNX 63 & above)
• PLC control system
• Anti repeat safety device
• Pneumatic balancers
• Production counter
• 2 nos Mis-feed socket

Optional Accessories

• Variable speed with VFD motor
• Pneumatic die cushion
• Photo electric safety device
• Foot switch
• Quick die change system
• Load tonnage motor

Note: Technical details can vary according to the model.

The pin / key Revolving key type clutch is manufactured from W.P.S. material duly heat treated to provide long trouble free service.

Crankshaft & bearings: The crank shaft is made out from special Alloy steel and it is precisely ground finish. Heavy duty bearings and gun metal bushes with proper lubricating grooves ensure the adequate spread of the lubricating oil for smooth functioning.

Brake: Spring operated brake with out centered plate system works according to timing adjustment to provide longer life to the brake. It is operated by the cam.

Adjustable stroke: The unique feature of adjustable stroke enables the press to perform all kind of operations by employing short stroke for blanking & forming operation.

Ram slide: Ram slide is made from seasoned high grade duly ground for friction free travel through slides, ensuring longer life of die & easy operation.

Note: Technical details can vary according to the model.

“SEW”-SXP–2 Series two point h frame cross shaft power press

Salient Features:

• Box type steel welded construction
• Highly rigid frame, duly stress relieved
• Slide moves in 4 Point long guides
• Motorized slide adjustment with die height indicator (0.1 MM)
• Dual solenoid valve for safety
• SEW cross shaft, single point, gap frame ( C Frame) - SNX Series
• Even more accurate, even more dynamic - the Power Presses that raise standard's of precision & rigidity
• Single Point Suspension, non-inclinable single action press having steel plate fabricated construction duly stress relieved with 6 points gibbing of glide, fitted with pneumatically operated combined single disc, friction clutch & brake

Additional Features:

• Reduced noise & vibrations
• Minimal frame gapping, low angular deflection < 1.5 minutes
• High rigidity frame & bolster
• High precision forming for longer die life
• Hi-Torque pneumatically operated single disc combined clutch & brake unit
• Gear transmission runs in oil bath
• Wide slide & bolster area